b: > : (,,) : >Automatic resuscitator
: (,,) : >
: (,,) : >Mining resuscitator If you want to buy a resuscitator Buy the best, use the best, China Coal deserves your trust
: (,,) : ><:>
b: > : : >The basics of automatic resuscitator Requirements 1. Personnel operating automatic resuscitators must undergo specialized study and training. 2. This instrument must be maintained regularly to ensure that it meets the requirements of technical standards and remains in good condition. Preparation before resuscitation: 3. In order to achieve good resuscitation effect, the inspection and treatment of the wounded and the preparation of the resuscitation device must be carried out at the same time as soon as possible. Preparation work for the automatic resuscitator: quickly place the instrument and open the instrument cover. , Smoothly manage all pipelines. , Connect the suction device. , Connect the pumping automatic lung, mask, and pipelines. , Connect the autonomous breathing valve, air storage bag, and pipelines. , Open the oxygen bottle in the instrument. . After the resuscitation is working normally, use the high-pressure connecting pipe to connect it and connect the spare oxygen bottle. The oxygen pressure should not be lower than MPa. Automatic resuscitator operation: 6. When there is too much dirt in the suction bottle, you can open the suction tube and half-block the nozzle hole of the ejector (to prevent the pressure from being too high and causing the suction bottle to explode) to remove the dirt in the bottle. 7. After inspection, it is confirmed that the injured person is suspended in death. The resuscitator must be opened immediately, the automatic lung mask should be pressed on the injured person's face, and artificial respiration must be performed. 8. When starting to use the automatic lung for artificial respiration, the operator must gently press the cricoid cartilage in the middle of the injured person's throat with his fingers to block the esophagus and prevent gas from filling the stomach. After artificial respiration is normal, the throat compression can be stopped and the mask can be fixed with a headband. 9. When using the automatic lung for artificial respiration, the mask must be pressed tightly against the wounded person's face to prevent air leakage from affecting the work of the automatic lung. 10. When using an automatic lung for artificial respiration, if the respiratory tract is not clear, the automatic lung will move too fast. At this time, the mandible of the injured person can be lifted up to facilitate the smooth flow of the respiratory tract. If it is still ineffective, the obstruction in the respiratory tract should be cleared again. . 11. When using automatic lungs for artificial respiration, unless death (appearance of corpse spots) is confirmed by medical staff, the work must be done patiently and artificial respiration must not be interrupted prematurely. 12. When using an automatic lung for artificial respiration, if the wounded person is found to be vomiting, the vomitus should be removed in time, and then artificial respiration should be continued. 13. When using an automatic lung for artificial respiration, if the injured person is found to have severe spasm, they must be dealt with promptly (to prevent the injured person from biting the tongue and damaging other organs, etc.), and resume resuscitation work when artificial respiration is not affected. 14. When using an automatic lung for artificial respiration, the respiratory rate of the wounded should be adjusted by adjusting the pressure reducer and air distribution valve knob, times/minute, and children's times/minute. 15. For the wounded who are poisoned by corrosive gas, they are not allowed to use automatic lungs for artificial respiration, and can only use breathing valves for oxygen inhalation. 16. When the casualty resumes automatic breathing, the breathing valve can be used to inhale oxygen. At this time, the oropharyngeal airway can be removed, and the mask and fixed headband can be loosened. 17. When inhaling oxygen for ordinary casualties, the oxygen content adjustment ring on the breathing valve can be adjusted to , but for the wounded with carbon monoxide poisoning, the oxygen content adjustment ring must be adjusted to , and the oxygen inhalation work must not be terminated prematurely. Recovery and management of the automatic resuscitator after use: 18. After the automatic resuscitator is used, the mask, suction device, oropharyngeal airway, automatic lung, autonomous breathing valve and other parts that have been used must be cleaned with alcohol and clean water. Disinfect and clean the equipment and tools, and clean the inside and outside of the instrument to make it meet standard requirements. 19. When storing, using, and carrying this instrument, violent collisions are prohibited to prevent damage to the instrument and the automatic lung. 20. The consumed oxygen, parts, etc. should be replenished in time. 21. After the automatic resuscitator is used, it should be inspected and maintained in time. The action frequency of the automatic resuscitator should be adjusted to ensure that the instrument meets the technical standards and remains in good condition.
: : >
: (,,) : >Consult Shi Qingge for details
: (,,) : >
: (,,) : >No.: Email
> : (,,) : : >@.c
: (,,) : ><:>
Automatic resuscitator